This article is about choosing and buying the right SSD for 2020. Here you will find the best of such SSD (Solid State Disk Drives) in economical cost range to buy according to your needs and desires.

Solid State Disk Drive

The solid-state disk drives are made in competition with hard disk drives. That’s why they are made better than hard disk drives in all dynamics. The SSD is designed with Floating Gate Transistors which grasp the electrical safekeeping. These are special kind of electrical chips which stores the data even when the power source is unavailable.

SSD Improvements

If we take into deliberation all the storage devices than the solid-state disk drives are better than hard disk drives or any other storage device in the following factors:

  • Data Fortification
  • Fault Rectification
  • Sturdiness
  • Structure Encouragement
  • Spectacle Enterprise
  • Command Feasting
  • Enactment
  • Crossing point Contemplation
  • Exhaustive care and Management
  • Supremacy Idleness

Solid State Disk for Laptops

As everyone knows when technology changes, everything else is updated. Therefore the storage devices in laptops are also updated and improved to provide faster facts repossession, more toughness, and efficacy, and less racket while relocating data.

So now that the SSD’s are flattering straightforwardly inexpensive and there isn’t any need to appraise your whole system. Just fill in the HDD with SSD and get recompenses of quicker speed and other best geographies of SSD’s.

How to Buy Right SSD

Feeding your laptop with a good SSD is the key to make it best in performance in every domain. If the laptop gets its data most quickly, then it can perform even billions of cycles just in fractions of time. Therefore to get optimal performance of a laptop system, an SSD is required.

So let’s discuss what the important aspects that are must be considered while buying an SSD for a laptop are:

1. Form factor

2. Interface

3. Bus type

These are the three things about a solid-state disk drive that are often confused, and sometimes they are partly covered. So let’s see them in detail so that no one gets confused in these things while buying an SSD:

Form factor

The form factor of the SSD or the shape is the thing that is most important to know before starting the purchase. Therefore some of the essential form factors include:

PCI Express

The Intel Optane drive comes in the PCI (Peripheral Component Interconnect Express) form factor. It just needs to be plugged into a slot on the motherboard. If we look back, then the most frequently used SSD is the 2.5-inch drive, which comes in SSD WD Blue, and it was connected to laptops that had a bay for them and the SATA (Serial Advanced Technology Attachment) interface.


These are small SSD’s that are used in laptops having compatibility with them. The Samsung NVMe 960 Evo is such an SSD that is 80 milliliters long, and it is what is known as an M.2 2282 SSD.


The interfaces of SSD drives are very much different from form factors. An interface is what is used to connect the SSD to the laptop system and install the SSD in it.

On the SATA interface, an edge can be seen on an SSD on which there is a blade connector, which is a two-part connector. One part is for the power delivered to the drive, and the other half is for the data traveling.

On the other hand, the M.2 drive uses a single blade connector on the end which goes into a slot on the motherboard.

Bus Type

While purchasing SSD, there is another important factor which is known as the bus type. The bus basically is the data pathway from the SSD to the laptop system. The kind of bus needs to be known in many cases to buy a compatible SSD.

For example, any SATA drive that is bought uses the SATA bus. So, in this case, the interface and the bus are the same things. However, with an M.2 drive, there may have two buses. The SATA bus is used in the SATA drive. The 2.5 inch SSD drive port may use the PCI Express bus, which is used in PCI express drive, and the two drives go into a slot on the motherboard that can support depending on the slot one or the other type of bus or in some case both.

Therefore it is needed to know what your system supports and what drives support before you can know what is compatible in your system.

10 Things to Consider While Buying Right SSD

SSD provides thunderbolt lightning-fast whether you are booting up your laptop system or running any sort of applications or transferring data from one place to another. It is best to remove your problem of waiting for so long for desktop icons to load when you start up your laptop system and load windows on it.

With SSD, your system boots up very quickly, and applications load fast. But there are a couple of things that should be kept in mind while purchasing an SSD drive for your system. Some of these are:

Disk Capacity

There is another option to save both your time and money. That option is the Dual Drive Configuration. In this setup, you can use SSD drive for running the operating system to run windows and do kernel-level tasks, and Scheduling and the HDD drive can be used for data transfer and storage. In this configuration, 256GB SSD and 1TB HDD can be used for storage and other operations.

Another option is the single drive configuration, which is to use SSD instead of HDD. In this configuration, a single SSD has a storage capacity of 512GB, or 1TB would be enough for OS as well as storage.

Quality of SSD

The quality of an SSD can be assured by the time of warranty an SSD producer provides. The longer the warranty, the better the quality will be. But the original quality of SSD is represented by the Management of wear patterns of SSD, and another factor is that the SSD drive gives a warning before its expiry or dying or not.

Performance of SSD

The SSD performance is measured in the reading and writing speed of the drive. An average speed of SSD lies between 500 MB per second for reading and 400 MB per second for writing.

There are tools available that are used to do the speed and performance tests of SSD drives. Also that approximately 50 percent of SSD’s have sequential reading and writing speeds for a random user.

Flash Memory

Solid State Disk drives use Flash Memory to store data and perform read/write operations. Therefore different types of flash memories are:

SLC: The Single-Level Cell is the fastest type of flash memory discovered yet. This NAND flash memory is used in most of the SSD’s.

MLC: The Multi-Level Cell is the middling speed NAND flash memory, which stores 2 bits per cell.

TLC: The Triple-Level Cell is the slowest NAND flash memory and is used very less in SSD drives.

Mean Time between Failures (MTBF)

It is the ratio of running hours of products shipped, which is divided by the number of failed units. The reliability of SSD drive depends mostly on the MTBF factor. SSD’s with longer MTBF is, in fact, a sign of good SSD, but this is not the assurance of a greater lifetime of SSD drive.

Operating System and App Exodus

This factor is important for those who are wishing to replace their HDD with SSD or upgrading their SSD. So the Migration of current operating systems and applications must be looked upon to avoid any later complex circumstances.

Some SSD has built-in cloning or migration software. Once this software is run, it transfers or migrates your operating system as well as applications to the new SSD. Once this process is done, the SSD drive can be easily installed into the system.

Physical Provisions

This factor is also important before buying an SSD. It can cause you serious problems if you bought an SSD drive, and when you tried to mount it into your system, it didn’t fit. Most SSD’s come in standard sizes, but paying attention to this factor is good for saving yourself from the aftermaths of this problem.

Error Correction Code

The error correction code is a self-automated code that exists in SSD’s to ensure the safe transfer of data and to protect the system from data exploitation. Therefore always pick up SSD with ECC code enabled in it.

Installation of SSD

The installation of an SSD is quite similar to the installation of HDD. But it has some of the changes. Firstly you have to access your BIOS and configure the setting of SATA from IDE to AHCI. Doing this enables us to get the best and maximum performance of SSD.

Warranty of SSD

Mostly SSD comes up with a warranty tag of 3 years or 5 years. I suggest a 5-year guarantee plan would be the best option to choose while purchasing SSD. This warranty can also be taken as time, after which it becomes necessary to back up your important data to protect it from any data loss.

Final Thoughts

Lastly, we can conclude it by a suggestion that ignoring these factors or taking them to the extreme both would not be good as one can cause extreme danger, and others can cost a lot of money. Taking the middle way, in any case, is always the best option.

Therefore suggestion is to use a Dual Drive Configuration for your laptop system. Use a lighter storage SSD like 256GB or 512GB for Operating system to perform kernel-level operations and for secondary storage use an HDD of about 750GB or 1TB for transfer and storage of data. This would save you money and gives your laptop system the best performance.

Pin It on Pinterest